Shower stalls

[Robj]

Hi,

What maintenance issues are with marble in a shower stall. I read an article that said you have to wipe it down everytime you shower. Is this true? Marble is beautiful but I need to know what I am getting into before I make my selection. Thanks

	Marble MARBLE: CHARACTERISTICS This standard includes general information on the characteristics and common uses of marble and identifies typical problems associated with the material. INTRODUCTION Marble is an extremely hard, metamorphic stone composed of calcite (CaCO3). It is formed as a result of the recrystallization of limestone under the intense pressure and heat of geologic processes. The effect of this process is the creation of a stone with a very tight crystalline structure and small but definite porosity. Because of its structure, marble can take a very high polish and is a very popular decorative stone for architectural and sculptural uses. The limited porosity of marble, especially polished marble, makes it less vulnerable to the leaching effects of water. Calcium carbonate, however, of which marble is composed, is highly susceptible to attack by acidic agents. Marble is readily dissolved by acids, even very dilute acids, however the actual results of acidic exposure will vary with the nature of the acid. Chlorides, nitrates, sulfates and other chemical compounds react differently with marble and produce various by-products, which have a wide range of solubility and impact on the durability of marble. For this reason, it is always important to determine the exact type of pollutants causing marble deterioration. Marble itself can be of two types, one composed of calcite and the other of dolomite. Dolomitic marble is much more resistant to acid attack than calcite marble. The color of marble ranges from the brilliant white of calcite to black, including blue-gray, red, yellow and green, depending upon the mineral composition. TYPICAL USES Marble has many decorative and structural uses. It is used for outdoor sculpture as well as for sculpture bases; in architecture it is used in exterior walls and veneers, flooring, decorative features, stairways and walkways. The way in which the stone is used may be a factor in limiting or controlling the severity of exposure. The use or function of the marble may also affect the feasibility of applying certain treatments, but type of use is not the primary factor in the major types of deterioration and damage to which marble is susceptible.

[cheesedog]

Originally Posted by Robj

Hi,

What maintenance issues are with marble in a shower stall. I read an article that said you have to wipe it down everytime you shower. Is this true? Marble is beautiful but I need to know what I am getting into before I make my selection. Thanks

it does require maintanence and some care. squeegee the walls and floor down after every shower, and wipe with a towel to remove any standing water. also over time, hard water will takes its toll on sensitive polished stones, like marble. it will become dull eventually, unless proper care is taken. other than that you should be fine, depending on what type of marble youre talking about?

	Marble MARBLE: CHARACTERISTICS This standard includes general information on the characteristics and common uses of marble and identifies typical problems associated with the material. INTRODUCTION Marble is an extremely hard, metamorphic stone composed of calcite (CaCO3). It is formed as a result of the recrystallization of limestone under the intense pressure and heat of geologic processes. The effect of this process is the creation of a stone with a very tight crystalline structure and small but definite porosity. Because of its structure, marble can take a very high polish and is a very popular decorative stone for architectural and sculptural uses. The limited porosity of marble, especially polished marble, makes it less vulnerable to the leaching effects of water. Calcium carbonate, however, of which marble is composed, is highly susceptible to attack by acidic agents. Marble is readily dissolved by acids, even very dilute acids, however the actual results of acidic exposure will vary with the nature of the acid. Chlorides, nitrates, sulfates and other chemical compounds react differently with marble and produce various by-products, which have a wide range of solubility and impact on the durability of marble. For this reason, it is always important to determine the exact type of pollutants causing marble deterioration. Marble itself can be of two types, one composed of calcite and the other of dolomite. Dolomitic marble is much more resistant to acid attack than calcite marble. The color of marble ranges from the brilliant white of calcite to black, including blue-gray, red, yellow and green, depending upon the mineral composition. TYPICAL USES Marble has many decorative and structural uses. It is used for outdoor sculpture as well as for sculpture bases; in architecture it is used in exterior walls and veneers, flooring, decorative features, stairways and walkways. The way in which the stone is used may be a factor in limiting or controlling the severity of exposure. The use or function of the marble may also affect the feasibility of applying certain treatments, but type of use is not the primary factor in the major types of deterioration and damage to which marble is susceptible.

[Huligar]

hold up dog.
First, what type of marble do you want to get get?
Will it be full slab, 18x18, 12x12, 4x4 tiles?
What will you seal the stone with?
Do you have hard water?
Please tell us a little abour your cleaning habits.

Members of the NSRA will not make a blanket statment do to the fact that every stone needs different type of care.

	Marble MARBLE: CHARACTERISTICS This standard includes general information on the characteristics and common uses of marble and identifies typical problems associated with the material. INTRODUCTION Marble is an extremely hard, metamorphic stone composed of calcite (CaCO3). It is formed as a result of the recrystallization of limestone under the intense pressure and heat of geologic processes. The effect of this process is the creation of a stone with a very tight crystalline structure and small but definite porosity. Because of its structure, marble can take a very high polish and is a very popular decorative stone for architectural and sculptural uses. The limited porosity of marble, especially polished marble, makes it less vulnerable to the leaching effects of water. Calcium carbonate, however, of which marble is composed, is highly susceptible to attack by acidic agents. Marble is readily dissolved by acids, even very dilute acids, however the actual results of acidic exposure will vary with the nature of the acid. Chlorides, nitrates, sulfates and other chemical compounds react differently with marble and produce various by-products, which have a wide range of solubility and impact on the durability of marble. For this reason, it is always important to determine the exact type of pollutants causing marble deterioration. Marble itself can be of two types, one composed of calcite and the other of dolomite. Dolomitic marble is much more resistant to acid attack than calcite marble. The color of marble ranges from the brilliant white of calcite to black, including blue-gray, red, yellow and green, depending upon the mineral composition. TYPICAL USES Marble has many decorative and structural uses. It is used for outdoor sculpture as well as for sculpture bases; in architecture it is used in exterior walls and veneers, flooring, decorative features, stairways and walkways. The way in which the stone is used may be a factor in limiting or controlling the severity of exposure. The use or function of the marble may also affect the feasibility of applying certain treatments, but type of use is not the primary factor in the major types of deterioration and damage to which marble is susceptible.

[Topshop]

Let's get more info before you drive people away from marble, cheesey.

	Marble MARBLE: CHARACTERISTICS This standard includes general information on the characteristics and common uses of marble and identifies typical problems associated with the material. INTRODUCTION Marble is an extremely hard, metamorphic stone composed of calcite (CaCO3). It is formed as a result of the recrystallization of limestone under the intense pressure and heat of geologic processes. The effect of this process is the creation of a stone with a very tight crystalline structure and small but definite porosity. Because of its structure, marble can take a very high polish and is a very popular decorative stone for architectural and sculptural uses. The limited porosity of marble, especially polished marble, makes it less vulnerable to the leaching effects of water. Calcium carbonate, however, of which marble is composed, is highly susceptible to attack by acidic agents. Marble is readily dissolved by acids, even very dilute acids, however the actual results of acidic exposure will vary with the nature of the acid. Chlorides, nitrates, sulfates and other chemical compounds react differently with marble and produce various by-products, which have a wide range of solubility and impact on the durability of marble. For this reason, it is always important to determine the exact type of pollutants causing marble deterioration. Marble itself can be of two types, one composed of calcite and the other of dolomite. Dolomitic marble is much more resistant to acid attack than calcite marble. The color of marble ranges from the brilliant white of calcite to black, including blue-gray, red, yellow and green, depending upon the mineral composition. TYPICAL USES Marble has many decorative and structural uses. It is used for outdoor sculpture as well as for sculpture bases; in architecture it is used in exterior walls and veneers, flooring, decorative features, stairways and walkways. The way in which the stone is used may be a factor in limiting or controlling the severity of exposure. The use or function of the marble may also affect the feasibility of applying certain treatments, but type of use is not the primary factor in the major types of deterioration and damage to which marble is susceptible.

[Steve Patrick]

Wiping down or using a squeegee does help- that's useful advice for any type of surface. Turning on a fan or some ventilation after showering will accelerate evaporation of moisture in a shower . That will deter mold growth.
I recommend switching to liquid soaps as opposed to bar soap. The glycerin binders used in bar soap tend to accumulate more so than liquid soap. Soap build- up and hard water are the usual issues in any shower stall - fiberglass, tile etc.

[Robj]

Does polished granite require wiping down after every shower. If the answer is yes is there anything that doesn't require wiping down after showering. What about porcelain?

[Steve Patrick]

There's no real requirement of wiping down any of these surfaces A regular weekly cleaning of the shower is more realistic for most homeowners. We are simply suggesting the optimum maintenance for natural stone. Which is really not that much at all.
Fiberglass, glass or ceramic tile requires just as much to keep it looking it's best.
It comes down to aesthetics. When was the last time you heard somebody bragging about their newly installed fiberglass shower...

[Topshop]

Good points Steve,

Any surface will require as much cleaning as another. It is just that if you spend the money on a natural stone you want it looking as beautiful as when you put it in.

Granite is a better choice over marble in my opinion because if you get a soap scum build up on granite you can razor blade it off safer. You may scratch marble with a razor blade if you are not careful. Marble is also acid sensitive so watch out which cleaners you use on it where a true granite is not acid sensitive.

If you go with slab walls you will not have any of the grout joints you get with a porcelian, ceramic, stone tile or any other tile. Slab will be easier to squeegee - which is suggested but optional.

Remember soap scum sticks to every surface.

	grout GROUT The material used to fill in the joints between stone tile. Grout can be cement or plastic resins.

	Marble MARBLE: CHARACTERISTICS This standard includes general information on the characteristics and common uses of marble and identifies typical problems associated with the material. INTRODUCTION Marble is an extremely hard, metamorphic stone composed of calcite (CaCO3). It is formed as a result of the recrystallization of limestone under the intense pressure and heat of geologic processes. The effect of this process is the creation of a stone with a very tight crystalline structure and small but definite porosity. Because of its structure, marble can take a very high polish and is a very popular decorative stone for architectural and sculptural uses. The limited porosity of marble, especially polished marble, makes it less vulnerable to the leaching effects of water. Calcium carbonate, however, of which marble is composed, is highly susceptible to attack by acidic agents. Marble is readily dissolved by acids, even very dilute acids, however the actual results of acidic exposure will vary with the nature of the acid. Chlorides, nitrates, sulfates and other chemical compounds react differently with marble and produce various by-products, which have a wide range of solubility and impact on the durability of marble. For this reason, it is always important to determine the exact type of pollutants causing marble deterioration. Marble itself can be of two types, one composed of calcite and the other of dolomite. Dolomitic marble is much more resistant to acid attack than calcite marble. The color of marble ranges from the brilliant white of calcite to black, including blue-gray, red, yellow and green, depending upon the mineral composition. TYPICAL USES Marble has many decorative and structural uses. It is used for outdoor sculpture as well as for sculpture bases; in architecture it is used in exterior walls and veneers, flooring, decorative features, stairways and walkways. The way in which the stone is used may be a factor in limiting or controlling the severity of exposure. The use or function of the marble may also affect the feasibility of applying certain treatments, but type of use is not the primary factor in the major types of deterioration and damage to which marble is susceptible.

[glenn k]

Granite slabs for shower walls would be the best choice. Maintenance is not as demanding, and when needed is much easier (i.e. water spots, scum removal).

Unlike porcelain or ceramic, it will last longer and (even a hundred plus years from now) can easily be repaired or restored back to its original condition. You also dont have to worry about cleaning dirty grout lines.

	grout GROUT The material used to fill in the joints between stone tile. Grout can be cement or plastic resins.