Natural Stone Restoration Alliance - View Single Post

Huligar · 02-22-2008, 01:38 PM

This is a large job job and it will take you some time. If this was my job, I would wash the wall with vinegar and water just to cut the wax, than hit it with 5x or B52 and re-polish the stone. I can get about a 100 feet a hour with out killing my arms. Test the your vinegar and water solution, this solution can damage the stone, so please test in a small area. also start from the top and work your way down. clean and naturalize all the run off and drips. Seen that you are in India, I hope you get paid what this job is worth, I also hope you can get all the stuff that is needed to do this job.

02-22-2008, 01:38 PM	#3 (permalink)
Huligar Instructor Join Date: May 2005 Location: NY Posts: 7,869 Photos 116	Re: Black Marcqino on cladding This is a large job job and it will take you some time. If this was my job, I would wash the wall with vinegar and water just to cut the wax, than hit it with 5x or B52 and re-polish the stone. I can get about a 100 feet a hour with out killing my arms. Test the your vinegar and water solution, this solution can damage the stone, so please test in a small area. also start from the top and work your way down. clean and naturalize all the run off and drips. Seen that you are in India, I hope you get paid what this job is worth, I also hope you can get all the stuff that is needed to do this job. __________________ To provide quality natural stone care, restoration and maintenance through a network of qualified natural stone professionals. Please do not PM me for support. Please request help on the forums.