I take it nobody here has any pros or cons to say about sprint antidrop as it seems like nobody here has used it before.
For applications the bottle says :On very absorbent materials, make two or three coats, allowing the solvent to flash off between applications. When the surface is perfectly dry (30-60 minutes) take off the excess of product with a soft cloth soaked with antidrop, rubbing up to the achievement of a uniform aspect.
Pretty straight forward and that is what I did. Used a brush to apply, by the time I was at the end of the stone in application the beginning had already flashed of so I just went back to the start and reapplied. Did that three times. After that I gave it some time to dry some as stated in the instructions, perhaps 30 minutes, and then I took a terry towel added some antidrop to the towel and removed the excess film of sprint antidrop. Thanks
